What did U do to your G-body today??

[SURESHOT]

WET SANDED THE DRIVERS SIDE /TRUNK

 

[liquidh8]

Sureshot, good luck with that. I HATE color sanding and buffing! lol
I got some of my delivery from ROCKAUTO. rear main seal, oil pan gasket, timing cover gasket and front seal, front and rear transmission seals, NGK plugs. Waiting on valve body gaskets and trans pan gasket. Time to seal my leaky turbo 6 up!. I'll clean and paint everything of course!

 

[flatblack79]

looked at it, then looked at how tall the grass has grown around it.. wished it was running...... then walked to the shop to work on my truck.

 

[10secBu]

Got a new pair of 295/65 Hoosier DOT D/R's mounted up today. Getting ready for the next RAM race on the 18th at MIR.

 

[Malibu Monte]

Worked on stripping the clearcoat off of my MCSS wheels.

 

[toxicbu]

walked to the garage and looked at turned around went back inside

 

[liquidh8]

Did the rear main seal in the Buick, cleaned painted the oil pan, put a new oil pan gasket in it. But I pressure washed the whole bottom before starting this. Also put together my buddies 91 harley EVO motor. Gonna yank the transmission in the Buick today to re-gasket it.

 

[LS6 Tommy]

I'm in the middle of reinstalling the rear end. Just taking a sake & sashimi break.

Tommy

 

[liquidh8]

Hunted down a gear selector shaft seal for the transmission. Yanked the transmission, replaced than seal, the front seal, the rear seal, put a 700r4 bottom feed filter in it, the deep pan I made. Also cleaned up the crossmember, and had to weld a bracket to the DS frame rail for it. The detail for that will be in my build thread. Then I finished the Harley EVO engine I was building for my buddy.

 

[383S10]

Last night washed mine took it to the track but didnt run it.......but for the 1st time there were more G-bodies than Mustangs and Camaros.......5 Malibus, 4 Cutlasses, and 1 Regal.....oh yeah it rained earlier and they didnt get the track dry until 8 o clock.............