Search results

I have not had the time to tackle it yet.

I got a Summit Racing .005 shorter timing set and it took care of the slack problem.THANKS

Anymore helpful suggestions?THANKS

So can I just buy a shorter chain like the Comp Cams # 3037 that is .005 shorter and it will work with my Comp Cams#2100 timing gears?THANKS

Yeah I think the block was aling honed.

I have a SBC 406 shrtblock I have installed a used Retro fit Hyd Roller Comp Cam in and Im putting a Comp Cams double roller timing chain set on(part#2100) I have the TDC installed the lower sprocket straight up and when I install the top sprocket with the chain with the dots in correct line,the...

OK THANKS

So the center link has the threaded stud on it?THANKS

So the pitman arm on the gear box dosen't have a threaded stud that goes through the center link or what?THANKS

Loose on the center link.

Loose on the center link.

The shaft on my pitman arm is wore out(loose) need to get another one.

I have a 1978 Monte Carlo and need to replace the pitman arm on it but can't find one anywhere,anyone know where I can find one(what part store or part number, like for MOOG)?THANKS

With that head and cam setup I will go with something like a 342 or 355 rear gear since you are driving 8 miles one way and the stall you mentioned will work OKAY.

Yeah Comp Cams retro fit pushrods are 7.300",I guess Crane Cams lifters are taller than the Comp Cams lifters.THANKS

Yep all stock parts,so do you think any other size pushrods will work(just wondering).THANKS

So will the 7.050" pushrods work GOOD?THANKS

I have a set of Crane Cams Hyd Retro fit roller lifters(part#11532-16) and was told that they require the 7.046" pushrods and I have a set of Comp Cams Retro fit roller cam pushrods(part#7609-16) that are 7.300" long will the Comp Cams 7.300" long pushrods work with these Crane Cams roller...

A guy has a good USED SBC 4340 400 Eagle Forged crankshaft for sale and I was wondering what one of these used Forged crankshafts are worth?THANKS

THANKS ALOT!!!!