Search results

I was looking at the NEW Edelbrock E-210 heads(part#5085) has anyone used these heads or know how well they perform compared to the Edelbrock E-Tec 200 heads,the E-210 look like they flow pretty good and a NEW set for less than $1000.

Cant download pics but I have seen some pics of SBC Canfield heads with the freeze plugs in the fronts that were on Ebay.

These are SBC heads with the Vortec bolt pattern that is on a Chevy 5.7 block(3880) casting,out ot a 1996 Tahoe truck, I myself have never seen heads like these and no one else that I know has, just thought somebody will know something about them,there are no casting numbers on them but they do...

Was wondering if anyone know about some SBC Vortec heads that has freeze plugs in the fronts and rears of them where the accessory bolt holes are,would like to know if they perform like the regular Vortec heads or what,they are installed on a SBC Vortec engine that came out of a truck,I never...

I have a SBC 406 shortblock with stock 400 rods and SpeedPro ZL2352F30 Forged pistons,piston head volume is +14.00cc,compreesion distance is 1.555 in. the block is stock deck height,what will the compression ratio with these pistons be with 75cc AFR heads?THANKS

How much is SBC 400(509) virgin bore bare block worth that has been magfluxed,hot tanked,checked for cracks,cleaned and ready to go,only need freeze plugs and oil galley plugs?THANKS

I will bw getting a new Eagle crankshaft soon and was wondering is there a certain way to store it until i use it?THANKS

I think the crank is the problem it has scars and burrs on the rear main journal.

All plugs look good and all oil gallies,why do you think this engine only leaks when the engine is shut off,I thought a rear main seal or oil galley will leak when the engine is running/THANKS

Are the cam plugs on the back of the block behind the flexplate,those are dry and where are the galley plugs?THANKS

Are the cam plugs on the back of the block behind the flexplate,those are dry and where are the galley plugs?THANKS

I have a SBC 400 bored.60 over and have replaced the rear main seal with the bigger FelPro #2909 rear main seal which I had to force it in and the engine still leaks from the rear main seal when the engine is shut off like it has done in the past,could it be that I tore the rear main seal...

I forgot to mention I offset the rearmain seal and put dabs of RTV on the edges.

I installed a FelPro #2909 rearmain seal which I had to like force it in but it went in,could I have tore the rear main gasket because when I assembled the engine and fired it up on the stand it stills leaks when the engine is shut off and the oil pressure hand is dancing around 40psi -60psi,any...

I installed a FelPro #2909 rearmain seal which I had to like force it in but it went in,could I have tore the rear main gasket because when I assembled the engine and fired it up on the stand it stills leaks when the engine is shut off and the oil pressure hand is dancing around 40psi -60psi,any...

I replaced the rear main seal with a FelPro#2909 which I had to like force it in, but got it in,assembled the engine and it still LEAKS when the egine is not running any HELP PLEASE.

I have a set of Trick Flow aluminum heads(part#TFS-30400002)for a SBC engine and the springs are 1.470"o.d., [email protected] open with .540" max lift and I was wondering will these springs work with a HYD.ROLLER cam with .520"lift? ANY HELP

OK will DO

OK I got the rear main seal in the shortblock is there anyway I can see if it will leak with just the shortblock assembled or do I have to assemble the whole engine and crank it on the engine stand?THANKS

I will be installing a rear main seal in my SBC 400 engine,I have seen it getting removed and think I can remove it but how do you install it in the engine and any pics of which way the seal goes in?THANKS