Search results

How do I get to it on the Comp Cams website,didnt see it?THANKS

So how much HP/TORQUE with the Thumpr cam in the SBC 400,engine is already complete?THANKS

U think 400+ HP?

Not looking for REAL Hi-Performance out of this engine it will be for a daily driver car just wondering HP/TORQUE numbers.

Any Help on this?THANKS

I have a stock SBC 400 shortblock(509)casting, that I added Comp Cams Thumpr Hyd. Roller cam(Part #12-601-8).522/.509 lift,235/249 duration @.050,Felpro 1014 headgaskets,Edelbrock RPM aluminum heads(part#6089)185intake,64cc,202/160 valves with 1.6 roller rockers,Edelbrock Air Gap intake with a...

So will the Moroso part# 62515 work with the stock frame mounts or do they have to be used with the aftermarket solid frame mounts,I'm asking about the mounts that bolts to the engine?THANKS

I have a SBC 400 that I will be installing in my 1978 Monte Carlo that has a SBC 305 engine in it now and would like to know are there any aftermarket motor mounts that will replace the stock clamshell type motor mounts that will work with the STOCK frame mounts, if so any name and part...

Has anyone used or know someone that has used a Proform 650 doublepumper carb with electric choke(part# 67212)if so how do they perform and how do they compare to a Holley 650 doublepumper?THANKS

I will be using a Comp Cams Thumpr cam(part# 12-601-8)with .522/.509 lift with 1.5 rockers,the cam calls for a 2500+ stall converter and I have a 2500 stall so if I use the 1.6 rockers I know it will bump the lift up some and will I have to get a bigger stall converter or will the 2500...

I have a stock 7.5 with 373 gears in my Monte Carlo SS with a 425+hp SBC 406 been working fine for me for years, has a aliminum differential cover with bearings support studs, only use on street no slicks.

I have a good chance of getting some Mr.Gasket SBC 400 headgaskets(part#MRG-5801G) for a good price and was wondering does anyone know or had any experiences with these gaskets compared to the FelPro 1014 SBC 400 headgaskets on aluminum heads?THANKS

I have some Felpro 1014 headgaskets for a SBC 400 engine and the only thing is that one is a older version which is like a grey in color and the newer one is like a blue in color PermaTorque, will these gaskets work the same when installed on my sbc 400 engine or should I but another newer...

Okay will try that.THANKS

Yeah it worked but couldn't get in the tight areas.

I have a set of Hedman ceramic coated headers that have been sitting in the garage for a while and has developed some rust on them is there anything like Naval Jelly or Rust Off that will remove the rust off the headers or what will?THANKS

Yeah cranked 400 on the stand and it runs great,will be doing upgrades soon I hope,heads,cam,etc.

The SBC 350 remain block was a 010 block with 267/305 heads on it have anyone ever seen this type of sbc remain engine if so whats the specs on this engine?THANKS

I went with the 400.

I have a chance at buying 1 of 2 SBC engines,the first is a complete SBC 400(509)castings with a Edelbrock aluminum intake, Edelbrock chrome valve covers and a NEW looking Edelbrock carb with a longtail 350 turbo trans attached to it,I remove one of the valve covers and it looks clean on the 882...