Search results

I have a 1980 Chevy Monte Carlo with a small block Chevy 400 on a 700 R4 Transmission I would like to know the exact detent cable that I need for the 700R4 transmission to a Holley carburetor I have the Holley carburetor bracket 20 - 95 how long should do detent cable be I cannot get Full...

A friend of mine has a small block Chevy 400 stand bore engine that runs ran good and we decided to change the heads and cam in it after removing the heads we realized that six of the Pistons are aftermarket dished pistons and two of the Pistons are Factory dished Pistons can this engine...

I have a stock bore and stock deck SBC 400 ENGINE with Badger 8.5 to 1 dish pistons and are swapping out the stock 882 heads with some Edelbrock 64cc heads and 039" thick head gaskets anyone know what my compression ratio will be with this swap? THANKS

I have a 1980 Chevrolet Monte Carlo with a sbc 400 engine, edelbrock rpm heads and will be installing a edelbrock air gap intake ( part # 7501 ) will I be able to use my stock hood for clarence with a air cleaner breather? THANKS

Who sells the cable kit? THANKS

Ok thanks

How can I get in touch with millabu? THANKS

How can I get in touch with nillabu? THANKS

I have a 1980 Chevy Monte Carlo with a 350 automatic transmission with column shift I'm wanting to replace the 350 transmission with a 700R4 with the stock column shift is there a way I can retain to stock column shift to work with all the gears with the 700R4 transmission,will the stock...

Yeah a guy is selling a good used one for $150

It's comp cams 12-415-8 camshaft

So will it be ok in a daily driver it's got to be better than a stock cam right?

Can a nitrous camshaft be used in a Street naturally aspirated engine if so what benefits are disadvantages? THANKS

Do the heads have to be disassembled? THANKS

I have a pair of sbc vortec heads that have been painted chevy orange including the area where the intake gaskets go on them (intake runners) what is the best way to remove the paint from the intake runners area and intake gaskets area? THANKS

I need to now the bolt thread pattern to install a puller to get the flange off.

What are the size of the bolts that secures the driveshaft to the rearend pinion flange, the four 7/16" bolts(thread size)THANKS

I'm asking are the moog the best springs for the $50 price? THANKS

I'm looking to replace my rear coil springs on my 1980 monte Carlo and I'm look for stock ride height are the moog 5379 best for the buck like $50? THANKS

Yeah this the first I seem with a staggered bolt pattern other than a sbc 400 engine