alignment issues

[Tado]

So I bought BMR front control arms (upper and lower) new springs, Qa1 shocks and a manual steering box. after i installed everything i took the car to get an alignment, afterwards i took the car for a drive and it drives straight no problems at all.... but after i parked i notice that the driver side wheel and tire is 2 inches farther back (towards the rear of the car) then the passenger side, and it sits an inch lower, also there is a stack of shims 2 inches think on the upper arms on the the driver side only. and it did not have any problems with factory setup. did i just get some retard who doesnt know how to align a car? has anyone had a problem like this?

 

[BMR Sales]

Take it back and get them to realign it. The cross shafts on our upper arms are offset. Tell them to flip the shafts over.

 

[Anonymous]

did i just get some retard who doesnt know how to align a car?

I'm going to have to say that if he let the car leave like that, then yes, you got a retard. :lol:

 

[LS6 Tommy]

Take it back and get them to realign it. The cross shafts on our upper arms are offset. Tell them to flip the shafts over.

Don't do that! Take it back, SHOW them what they did wrong, demand a total refund, then take it to another front end shop that has a friggin' clue as to what they're doing & let them do it right!!

Tommy

 

[Malibu355]

Take it back and get them to realign it. The cross shafts on our upper arms are offset. Tell them to flip the shafts over.

Don't do that! Take it back, SHOW them what they did wrong, demand a total refund, then take it to another front end shop that has a friggin' clue as to what they're doing & let them do it right!!

Tommy

X 2 3 4 5 and 6

 

[80montecarlo]

Take it back and get them to realign it. The cross shafts on our upper arms are offset. Tell them to flip the shafts over.

Don't do that! Take it back, SHOW them what they did wrong, demand a total refund, then take it to another front end shop that has a friggin' clue as to what they're doing & let them do it right!!

Tommy

well said, if they can't do it right the first time DONT GO BACK