i have an 355ci sbc motor with forged inverted dome pistons
motor has head studs and main studs, o-rings and the block has been deck
it has holley system max heads with 1.5 roller rockers ,heads are 190 runners 2.02 1.60 valves 67cc
victor jr intake with an 750 holley hp
an lunati drag solid roller 4500-8500 rpm .656int/.668exh lift ,316int/330exh adv dur
gear drive timeing ,scat steel crank ,all these parts are spare parts i used to build this motor i wanted to get you guys opinion on you think its going to run its going in a 79 camaro with a th350 3000-3500 stall and 4.56 gears with mt 28 x 10.5 tires car has lexan windows, guted doors ,feul cell ,fiberglass hood and trunk, one jegs raceing seat (give me some 8th mile times on motor and with an 250 nitrous plate system)
motor has head studs and main studs, o-rings and the block has been deck
it has holley system max heads with 1.5 roller rockers ,heads are 190 runners 2.02 1.60 valves 67cc
victor jr intake with an 750 holley hp
an lunati drag solid roller 4500-8500 rpm .656int/.668exh lift ,316int/330exh adv dur
gear drive timeing ,scat steel crank ,all these parts are spare parts i used to build this motor i wanted to get you guys opinion on you think its going to run its going in a 79 camaro with a th350 3000-3500 stall and 4.56 gears with mt 28 x 10.5 tires car has lexan windows, guted doors ,feul cell ,fiberglass hood and trunk, one jegs raceing seat (give me some 8th mile times on motor and with an 250 nitrous plate system)