Hey guys got a huge problem with my motor mounts. The motor sets cocked to the left I replaced the motor mounts and that has not helped i done this before i put the new motor in but i did not mark the old ones. I am actually thinking of putting solid motor mounts. Im kind of stumped. Oh I checked the adjustments and they are maxed out as well.
HELP!!!!!!!!
- Thread starter malibumarine1979
- Start date
This happened to me aswell, I had truck mounts from my motor and went to use them. I could get one side on but the other was just a little out, so i used a set of car mounts and it dropped right in.
i used a set of solids for a f body.........worked out well for my big block swap............if your not sure of the holes to use in the frame,you can bolt them to the motor and lower it in and mark the holes.....then lift the motor and install the frame mounts......at least you will know where they go....good luck and let us know how you make out ken
