install'n a radio ???

[jitteryguy]

does any one know or can tell me where to find the wire'n for a radio for my '92 Chevy full size truck ?

 

[Doober]

Is the original radio still in it? You can pick up a plug-in harness for '88+ GM vehicles, and just match the colors on the new radio to the adapter harness. All the connections will be to the main part of the radio down below the dash (look near where the ashtray sits). If that's all been taken out already, you can use the schematic for pretty much any of the GM vehicles (probably not all though) for your wiring colors
http://www.andylphoto.com/fiero/wiring.html

The adapter
http://www.bestbuy.com/site/olspage.jsp?skuId=4555699&st=gm+harness&lp=1&type=product&cp=1&id=1051384099483

I'm not positive just because I'm looking from home, but this is more than likely the mounting kit you'll need for the radio, also check for a pocket in the dash next to the gauges, it replaces the control unit for the radios that have it there.
http://www.bestbuy.com/site/olspage.jsp?skuId=2362259&st=gm+truck+radio&type=product&id=1051384084220

 

[jitteryguy]

thank's Doober , the wire'n is what I want'd to double check . some body put an adaptor in before then the next guy cut the wire's ! color's didnt match up ! my step son gave us a fancy pioner radio for the ol' truck ,,,,,,, now if we just how to get the rap CD out of it and turn the radio we'd be set !

 

[Doober]

:lol:!

I put in & took out more radios in the '88 I had than you could shake a stick at The '92 I'll be pullin' back out (unfortunately they're a breeze to take out) sometime to run new signal cabling for the amp.