I'm not exactly a new member but its my first post on the forum.
I'm trying to build a small block to run low 12's or high 11's on motor and after all motor I'm planing to put a little nitrous on the motor maybe a 250 shot and nothing more to maybe run high 10's. I have already acquired some parts and I don't know what heads to buy. I'm crossed between a 200cc world sportsman2 and a set of dart pro1 215's. And i dnt know what size converter to get (i think something right around 3000 stall).
i have the following for my build already:
part numbers are from summit racing.
gm forged 3.48 stroke crank.
Eagle h-beam 5.7 rods. ESP-5700B3D
keith black forged pistons with 2 valve reliefs. UEM-IC9929-030
350 30 over 010 020 4 bolt block standard deck height.
Lunati cam. 246 dur @050 and 0.515 lift on a 108 lsa. LUN-00012
Weind team G intake. WND-7530
And im planing on buying a holley 750dp carb.
The car is going to be street driven mostly and a weekend car. Its going into a full weight 85 monte carlo ss. It has a turbo 350 trans with a shift kit in it now and a 373 posi rear. All the help will be well appreciated.
This will be my first actual car build. Im doing all the work myself. Thanks for the help guys.
I'm trying to build a small block to run low 12's or high 11's on motor and after all motor I'm planing to put a little nitrous on the motor maybe a 250 shot and nothing more to maybe run high 10's. I have already acquired some parts and I don't know what heads to buy. I'm crossed between a 200cc world sportsman2 and a set of dart pro1 215's. And i dnt know what size converter to get (i think something right around 3000 stall).
i have the following for my build already:
part numbers are from summit racing.
gm forged 3.48 stroke crank.
Eagle h-beam 5.7 rods. ESP-5700B3D
keith black forged pistons with 2 valve reliefs. UEM-IC9929-030
350 30 over 010 020 4 bolt block standard deck height.
Lunati cam. 246 dur @050 and 0.515 lift on a 108 lsa. LUN-00012
Weind team G intake. WND-7530
And im planing on buying a holley 750dp carb.
The car is going to be street driven mostly and a weekend car. Its going into a full weight 85 monte carlo ss. It has a turbo 350 trans with a shift kit in it now and a 373 posi rear. All the help will be well appreciated.
This will be my first actual car build. Im doing all the work myself. Thanks for the help guys.