Ed, I have the Harwood bumper but I can't get pictures up to save my life so I'll give you a mental picture lol. Where the 2 front frame horns come out I plated it and welded some 1.5 in W. x 2=3" long 1/8 thick flat stock. Now on the bumper end of the deal I put another piece of flat stock same as the frame end and drilled a hole through both pieces to kinda hinge it. On the bumper itself I used 1.5in x3" flat and used 2 carriage bolts through the glass bumper. The carriage bolts give it a real bumper kinda look. Hope this helps. Slotting the frame plate bolts makes adjustment easier. hope this helps Tom