Search results

So whats the MAX cam lift that I can run with the STOCK SBC 305 and 2 barrel carburetor?

I have a 1978 Monte Carlo with a STOCK SBC 2 barrel engine and would like to know what is the MAX cam lift this stock engine will take, reason for asking is it is my daily driver and I'm about to change the timing chain and lifters so I thought I would also change out the cam while I'm in...

Okay I'll check them out on EVILBAY. LOL

The engine has been running great for over three years now with the same cam and heads but the heads have 1.5 stamped roller rockers and i was thinking of swapping to 1.6 full roller rockers or should i go with 1.5 full roller rockers

The springs were on the Edelbrock heads the way they came out the box

So if the MAX valve lift on my Edelbrock E-TEC 200 heads are .575" lift will It be OK to use the 1.6 roller rockers which will make the lift on my cam be .576" lift?

I have a set of Edelbrock E-TEC 200 SBC heads that the springs are rated at .575" lift max and I'm running a Comp Cams Hyd roller with .520" lift on the intake and .540" lift on the exhaust and was wondering if I install 1.6 roller rockers will the .540" lift exceed the factory .575" lift on the...

So how much do you think its worth it does have the 8.5 rearend but no engine or trans and its setup for a SBC engine?

A guy wants to sell a 1985 Cutlass 442 body with T-tops it is just the body no engine or trans in it and I don't know if the 8.5 rearend is in it I have to look and its setup for a SBC engine the body looks good and he says the interior is a 7 out of 10 so what do you think the body is worth?THANKS

Yeah I'm going with the steel flywheel.THANKS

Which flywheel will be better for a street car aluminum or steel I got a chance to buy a good USED Hays Aluminum flywheel for $130 but have heard that aluminum flywheels don't work good in street cars that weight more than 3000 lbs and my car weights like 3500 lbs so which is a better choice...

Im just going to run a 8 gauge wire from the alternator to the positive battery post.THANKS

Under the hood.

I have a 1 wire alternator for SBC and I think I need a 8 gauge wire to run from the alternator to the positive battery terminal and was wondering what size is the factory alternator wire that hooks up to the back of the stock alternator on a 1974 Camaro Z28?THANKS

Yeah I just used fresh gas in a gas can to fire engine up I don't know how long the carb will sit not planning to install engine till my daily drive decide to quit,just built the engine for a spare.

I have a new Holley Street avenger carb that I used to crank a rebuilt engine up that is on a engine stand and would like to know what are the best ways of storing the new Holley carb,can I keep it bolted and covered up on the engine or take it off and drain it and keep it in the box wrapped in...

I have a 1999 SBC 5.7 Vortec engine that I will be doing a carb setup on and need to know will a Comp Cams timing chain(part#2100)work with this Vortec engine or will i need a double roller timing set for the Vortec engine,this will be a NO computer engine.THANKS

Never mind,I just had to DING up a $400 pair of ceramic coated headers to get the plugs to fit. #-o #-o #-o #-o #-o

I'm looking for a shorty header plug for my SBC Dart Pro 1 Platinum angle plug heads like the Accell 416S shorty plug with a 14mm x 3/4"(.750) reach with a hot range in a NGK plug or something else,does anyone know the NGK or other plug name and part numbers?THANKS

I have a Powermaster 140 amp alternator(part#17805) it has the pulley for the serpentine belt and I want to install the blade fan and v-belt pulley with the 6 hole cone cover for my engine,will any of the aftermmarket blade fans, v-belt pulley and cone nose cover fit or is there a special one I...