20x10 rim frame notch

[Anonymous]

went with the Re-8 for more lift

 

[greasy]

Re: A Suggestion . . .....

Even those 2600# stones mounted 1:1 (on top of the rear end) is going to be a bit much. They recommend a tapered sleeve bag for that mounting position because the dbl. convoluted bag will ride rough.

I would opt for the F9100: Tapered sleeve style; 6.5" dia; 2000# capacity; 5.25" min height; 15" max extension; 10.5" ride height; air fitting on the vertical section vs the top plate; upper & lower plates are designed to mount directly to GM coil spring bracketry.
The optional choice for going lower would be a F9002: 5" dia; 1500#; 4.5" min; 11" max; 8" ride height.

Well actually car has been bagged for 2 years now, and works PHENOMINAL, i've personally bagged about 10 vehicles and helped out with numerous others, it's just what we do at IV EVER LOW, i went with the 2600 stones because well one of my buddies gave me a deal on 4......oh and compressed from top of upper bag mount, to the bottom of the lower bag mount it measures 5".....and i still have an plenty of lift..... and rides very well.....so no worries!!!!

 

[Anonymous]

did you have to modify your lower trailing arm mounts?

 

[greasy]

nope......just cut them off the 10bolt and welding them on the 12bolt, i did gusset them, and got a HR partsnstuff LCA mount/frame brace kit....

 

[Anonymous]

you narrowed the frame infront of the lower controll arm bracket right? wouldnt that change the angle? or its so minor it doesnt matter

 

[greasy]

Well i took an *ss load of measurments, and sketch's, no change in the angle, only moved inward 3" each, and rewelded (making sure your pinion angle is correct!) i also use double adjutable upper traling arms, and single adjustable lowers. Check out this thread by Barry, he did basically what i did, he kinda inspired me to do it, and pioneered my thinking of how i was gonna go about it......and he's got plenty of great pics.....

http://www.maliburacing.com/forum/viewtopic.php?t=30381&highlight=

 

[littlefranks]

i had a 28 12.5 sportsman pro on a 10 inch wheel with 5 inch back space with this notch and did it on the car .

 

[littlefranks]

13.4 section .sorry.

 

[Anonymous]

well started the work last night

its all tacked in there just gota make some cap plates and weld them in.
Thank you greasy for the info i needed.

If i did it over again id definatly brace it more. but all the measurments worked out in the end so its all good.[/img]

 

[greasy]

Cool....well good luck man!!! Keep us udated, i'd liek to see that notch!!