Engine swap? What would you do?

[Redline396]

check out the tech section on how to make the 2455 headers fit.......and for a cam i would look at the howards flat tappet cams #122312-10 or 122142-12......those are solid flat tappet cams and howards makes great camshafts.....dont know what year motor you wound up with,but i would keep my eye's open for a set of 049 or 781 casting heads........great flowing oval port heads ....imo.....with one of those cams and a team g intake and 850 or 870 carb.......depending on comp. ratio......i would aim for at least 10.0 to 1......would make great torque and horse power....just my 2 cents worth.......good luck ken