Triple check the firing order to ensure you don't have 2 wires swapped. There was another thread where swapped wires was the culprit.
went through and re-adjusted the lifters on the only side i messed i with. Took them all to clatter and then did a 1/4 turn tighten. Tried to drive the car and it will go but if you try to give it gas fast it will spit back and cut off. Also checked the plug wires and they seem to be just finebowtie81 said:you could try moving the wires over 1 spot either way instead of pulling the dizzy. Are the lifters set too tight on some? Is there any lifter noise?
No cant say that I have. Not really 100% sure how to check it all since I am still in the process of learning. Any suggestions on how I go about checking them?bowtie81 said:have you checked the float levels, power valve, acc pump?