Search results

  1. D

    where is the buzzer at

    Have you tried another headlight switch?
  2. D

    where is the buzzer at

    Does the buzzer come on when the key is on? Do the blinkers work when you jumper this wire? What wire are you jumpering? It sounds like you're connecting to one that's backfeeding through the rest of the switch. Double check your connections on the column for the turn signal switch, and...
  3. D

    79 bu new guages/trn sig

    x2, or the test light should work as well for seeing a dimming effect.
  4. D

    CTS-V T-56

    Silly engineers, where do they come up with this stuff :roll: :P
  5. D

    CTS-V T-56

    Look at the shifter location & output shaft... :shock: Any idea how hard this is to change over to a slip yoke? Shifter looks easy enough, then again it may also be possible to just change the front of the driveshaft to a bolt-on piece. *edit* But then I guess you'd need a collapsible...
  6. D

    Tremec TKO 600

    Loctite ftw \:D/
  7. D

    Autometer fuel level gauge

    I'm pretty sure Full is the high end (90 ohms) of the meter.
  8. D

    Thoughts on trying to use an LSx f-body fuel tank?

    The G-Body tanks and senders are also available new if you want to go that route.
  9. D

    TIRED OF WIRING. HELP. STILL RELAYS

    You just wire switched 12v - could be the ignition switch, or toggle like you want - to the 86 terminals. Just make sure it has a fuse somewhere near the voltage source (to be safe) & you'll be set :D It's the same for both relays how you have the terminals listed, 85 and 86 are for the...
  10. D

    what is a best used gear ratio for a daliy driver

    Forgot to say the method I try to stick to. I usually start with the tire height, and depending on the trans I usually try to aim for 1700-2000rpm at 70mph, a little higher if it's a 6-speed.
  11. D

    290 HP Crate Heads

    '87-'95 heads are like this, the ports are the same shape/size as the older heads though. Vortecs are taller and my understanding is standard ports require too much cutting to get them to match a Vortec head.
  12. D

    290 HP Crate Heads

    I think you'll be happier with Vortecs imo. You can get a set of used Vortecs for the same price or less from a salvage yard (a quick search on Car-Part.com says about $125 per head), and have them double checked at a machine shop for not too much (mine are 906, had no problems).
  13. D

    Electric hydroboost?

    That's what I'm wondering about. I'd rather go to a Powermaster than Hydroboost solely based on not having to run all the lines. A new unit is available through Autozone (don't know if the flaws of the original units have been corrected on these though) with a lifetime warranty... that there...
  14. D

    Dead Short

    That sounds possible if there is an internal short in the relay that connects to the blower for high speed.
  15. D

    Electric hydroboost?

    Yeah, they put hydroboost on several vehicles. Earlier (I'm guessing, I don't know the exact history) T-Types/GNs have a 'mechanical' version that's run off the power steering pump (lines run from the pump up to where the vacuum booster would be), Astro vans (some, if not all) have them, when I...
  16. D

    Electric hydroboost?

    I saw an '87 GN today at a show that had electric hydroboost. I thought G-Bodies only came with mechanical hydroboost...
  17. D

    GM techs (or anyone else that may know) - 4wd t-case ?

    Yeah, my dad said the tech at the dealer explained it the exact same way. Sounds like he's buying one from a junkyard and may get the part shown in the video.
  18. D

    GM techs (or anyone else that may know) - 4wd t-case ?

    Is this the one you're talking about? I sent him an e-mail about it, hopefully it's the same issue, meaning there is a fairly simple (from the looks of it) fix. http://www.youtube.com/watch?v=afmcNkgKuMY
  19. D

    GM techs (or anyone else that may know) - 4wd t-case ?

    I'll see if I can look up the Truck U episode and let my dad know about Auto 4wd. Sounds like he's going to a salvage yard & changing it himself this time (I guess it was $1,300, and all they did was replace the rubbed half of the case and the chain). He's probably getting it from Schram Auto...
  20. D

    New Floorpans installed - 2/8/10

    Hey! My floorboards aren't THAT bad! :lol: I just have a little pinhole rust in the passenger footwell, even feels solid still, the rest is still in good shape.