4 speed linkage problem

[malibu43]

hi there,i need to rebuild my 4 speed linkage,does anyone knw how to do this,with some pics,or maybe in the web? any help will be apreciated.
regards

 

[Doober]

What shifter, trans, etc.? It's possible you could get a shifter bracket/rod setup if it's a Hurst.

 

[malibu43]

doober,the trans its a 4 speed saginaw,and i have lots of dramas with the linkage,am not running with the reverse linkage on the same shifter i make myself another shifter foer that reverse.

 

[malibu43]

sorry i forgot to tell you the shifter its the stock one I.T.M.

 

[Doober]

I'm not sure what's available for ITM shifters :shock: What needs rebuilding?

 

[malibu43]

need to be rebuilding almost everything,mostly when i want to shift from 2 to 3 erd gear i cann't find the 3erd gear,and also the plates who atached to the trans (the one with the bolt) mostly its loose so the shifter for that gear its loos also,i dont know if i did explain mysel clear or not?.
thanks

 

[Doober]

Do you mean the bracket that holds the shifter itself, or the two arms on the side of the trans itself?

 

[malibu43]

i think my tech english its bad, but the problem its that shifter moves side to side,so sometimes i cannot find the 3 rd gear,the other problem its with the bolts who attach to the trans 1 bolt to the 1,2 gears,other bolt to the 3,4 gear,much clear now?
thanks

 

[Doober]

I thought that was what you meant. You should be able to tighten them up if they are loose.

 

[malibu43]

how? with shims?