read the previous post on lowering the rear it is said the chevelle would lower it 3 " i went on napa auto site and looked up a 68,69,70 the 68 was different than the 69/70 ,,,,, when i looked up the 68 i entered as a 396ss 2 dr hardtop heres the specs for the 68
I.D.:5.57"
Wire Diameter:.593"
Load Height:9"
# of Coils:5.4
Design Load:602
Spring Rate:168
Free Height:12.6"
--------------------------------------------------------------------heres the 70 .D.:5.58"
Wire Diameter:.531"
Load Height:9"
# of Coils:5.44
Design Load:616
Spring Rate:119
Free Height:14.71" so i would like to know which will accomplish my goal looks to me the 68 but only want to do this 1 time my other question are the springs used in combonation with stock shocks ,,,,i have the cheap shocks with the small coil springs on them they are not adjustable thanks for your input
I.D.:5.57"
Wire Diameter:.593"
Load Height:9"
# of Coils:5.4
Design Load:602
Spring Rate:168
Free Height:12.6"
--------------------------------------------------------------------heres the 70 .D.:5.58"
Wire Diameter:.531"
Load Height:9"
# of Coils:5.44
Design Load:616
Spring Rate:119
Free Height:14.71" so i would like to know which will accomplish my goal looks to me the 68 but only want to do this 1 time my other question are the springs used in combonation with stock shocks ,,,,i have the cheap shocks with the small coil springs on them they are not adjustable thanks for your input