Finished the sound deadening on the floor pans on rear wheelhouses. I used it ALL up, 50 sq ft. Now when I am ready, I'll buy some more and do the roof and doors. Should be a quite ride. It's not all that heavy either, My on sub weighs more than it.
What did U do to your G-body today??
- Thread starter HP JUNKEY
- Start date
Last night, I pulled the dash board and the gauges out of the Malibu. Also the rear seat, and the power windows/door lock harness'.
Touch n foam, freazer zip lock bags pugged up several holes in my heater box in the engine bay.. now I have a nice venting in the car also pulled the ac condensor out as well
also put a 78amp alt on.
Took an inductive amp clamp found that the blower fan will take 23amps on high to run.. @ idle the 63amp was puting out some 55amps @ 12.9 the 78 amp alt is doing 37 @14.6 at idle with ign blower and couple electric gauges
also put a 78amp alt on.
Took an inductive amp clamp found that the blower fan will take 23amps on high to run.. @ idle the 63amp was puting out some 55amps @ 12.9 the 78 amp alt is doing 37 @14.6 at idle with ign blower and couple electric gauges
started the malibu. 
warmed it up took it to get some gas drove to the post office and come home laid some ruber down dancin_banana.gif
warmed it up took it to get some gas drove to the post office and come home laid some ruber down dancin_banana.gifBought a 30x9" peice of plexy glass to put in front of the radiator to help warm up and keep temp closer to 180 vs 160 even though it has a 180 tstat in it.. and don't have to worry bought cardboard fallin apart from water and snow
started planning out a motor swap since the 305 has picked up a low end knock :x and I am now where ready to put in my 406 ](*,)
Similar threads
