What did U do to your G-body today??

[Malibu Monte]

Started and finished a frame notch to the seam yesterday on my drag car. Also have a bunch of other smaller projects going on as well. Transmisson is out and new one with transbrake is on the jack ready to go in. All I have to do is install the new shifter, will probably get it in this afternoon.

 

[Embryo]

Finished my rear package tray/speaker cover project seeing as my Sunday progress was delayed due to a small vehicle accident. It turned out great and I also ordered a new replacement dash cover for this coming weekend. Next on the list is finding a set of quarter glass trim panels that are in decent enough condition to refinish.

 

[80ECLT]

I put new carpeting on my door panels and converted them to power window and lock panels. They turned out great!

 

[lasttime78]

Bench to buckets=Done
Center console fabbed=Done
Now onto painting all Plastic trim, before shots and one of seats and console.
I would like to psost from start to finish all the fabricating of bracket,mount,console pieces,ect. how would I go about putting together ? Like some of the ones I have seen on here? Not sure thats why I ask.

 

[Blue Knight]

Bought mine a bottle..

And peeled that ugly sticker off and polished the tank

 

[DannyBoy515]

Got her out on the street today for a short bit. Still a hesitation when I punch it. Then found out I have a leak from front of intake. Grrrrrrrr. Guess its back in the garage til this wknd when I can pull it and re seal it

 

[phtmbu]

Got my 1/2 circle template for the 40" tubs clamped to the chassis and started doing so measuring for the tub template.

 

[StreetBu]

Just got her out of storage and drove her home this evening. Lots of stuff to do in the next 2 months! Electric fans, flywheel, clutch, replace the dowpipes for the exhaust, new instrument cluster, new balancer, pullies, belts, and find the pesky battery draw.

 

[HarrisonTX]

after a year of having it sit in the floor board I made a little gauge panel for my A/F gauge.
I have a matching MOONEYES Volt gauge to fill the other hole, just need to run the wires
(car not on, and fat as hell, just keyed to "on" for the pic)

 

[Blue Knight]

Got some used bottle brackets painted and mounted on the bottle. Also ran the nitrous line .