Lets see some engine pics
- Thread starter loneagle
- Start date
Thats a 455 olds with rocket racing heads, they have the stock valve angle. 6 degrees I believe.
TOMS78BU said:
Thanks allot!
The motor and rear suspension/under carriage looks better than the body.
It's a theft deterrent.......
HP JUNKEY said:
Where are u pulling the air in from. I want to do something similiar. Can u show some more pictures.
Jazzbo, The black elbow's are 4" PVC there is a 4" to 3" reducer at the RED coupler.
Going through the inner fender is the same reducer and a K & N "cone" filter. I fabbed
up some Stainless Steel sheet metal to block off in front of the wheels and formed a
"deflector shield" for the bottom. I pulls air from the space between the core support
and the fender. The filter housing up top is empty, no filter element {it was to restrictive} The spacer between the lid and bottom I also made out of stainless, had to "silver solder" 2 , 3" round by 3" long couplers on it to connect the red rubber couplers to the 3" aluminum tubes. I will take some pics tonight and post in my photobucket page and try to figure out how to put a link to it for you. I am at work supposed to be workin, But I find this more important :lol: :lol:
Going through the inner fender is the same reducer and a K & N "cone" filter. I fabbed
up some Stainless Steel sheet metal to block off in front of the wheels and formed a
"deflector shield" for the bottom. I pulls air from the space between the core support
and the fender. The filter housing up top is empty, no filter element {it was to restrictive} The spacer between the lid and bottom I also made out of stainless, had to "silver solder" 2 , 3" round by 3" long couplers on it to connect the red rubber couplers to the 3" aluminum tubes. I will take some pics tonight and post in my photobucket page and try to figure out how to put a link to it for you. I am at work supposed to be workin, But I find this more important :lol: :lol:
Similar threads
