Rearend not turning freely

Drew

Amateur Racer
Jul 27, 2006
182
0
0
TX
I just installed a 12 bolt a body rearend in my malibu its equipped with a spool. Is it normal to have resistance when I spin a tire. It seems like it spins about half a turn and then you have to put some effort into turning it. It seems like its one spot that has resistance. Thanks
 

bowtie81

Moderator
Mar 28, 2008
5,008
0
36
sarnia, ontario canada
mine does the same thing, and its all fine had the cover off and inspected. no worries
 
If not dragging brakes it could also be a u-joint, assuming it is still attached.

The sharper the angle of the joint, rear hanging vs at ride height, the more you will feel it. That's normal.

It would take a minute or 2 to pop the straps off at the yoke and double check.

This would also eliminate anything you might be feel from the trans.
 

MalibuRacing.com Gear

Stickers & Shirts!!