Track times..

[Roller406Bu]

Off idle spraying a few feet out car went a 6.79@102 on a 150 shot.....This is the first time i've ran it on spray still needs a tune im pretty happy for what it is...bottle pressure was 950 nx says to run a 1000 dont know if its hurting my times any will see next time...
1.51 sixty foot

Mods
texas speed ms4 cam
1 3/4 longtubes
victor jr
750 holley
3500 stahl
4.10's
southside lift bars
93 octane

With a brake should go pretty good....

 

[sofla78malibu]

Those are good times, making me want to get my car on the track/road sooner. I am building a similar setup and have a few questions. What trans are you running? Any idea what the car weighs? You dont list heads or any internals, so I assume you are still stock? Was that on slicks or drag radials?

 

[Roller406Bu]

Those are good times, making me want to get my car on the track/road sooner. I am building a similar setup and have a few questions. What trans are you running? Any idea what the car weighs? You dont list heads or any internals, so I assume you are still stock? Was that on slicks or drag radials?

350 turbo no idea on weight, only weight reduction is a fiberglass cowl hood...Still stock 80k mile motor....26x10 hoosier slicks...

 

[cherp22]

Nice that is a mid 10 sec cruiser there...

 

[455_82malibu]

do you think you would have enough gear with 4.10's to make a full 1/4 pass, especially on the NOS

 

[Roller406Bu]

do you think you would have enough gear with 4.10's to make a full 1/4 pass, especially on the NOS

Needs a taller tire for sure for 1/4 on spray.....

 

[Anonymous]

Hey Roller406Bu are you running a lq4 or lq9 motor and what heads

 

[Roller406Bu]

Hey Roller406Bu are you running a lq4 or lq9 motor and what heads

lq4 stock heads shaved for more compression.