Car is race only 78 monte carlo with 4 piston Strange rear disc brakes. Switching the the stock 1 piston front disc power brakes and going manual. Up front ordering a strange master cylinder and looking to upgrade disc brakes. Car weighs in at about 3000 lb stripped and assuming a 50/50 weight distribution. Looking at this:
http://www.summitracing.com/parts/WIL-140-1016/
Checked Strange, SSBC, BAER, summitt packages and this seems where I will end up. Would appreciate any input from brake guys on the compatability of this wilwood set up as I am thinking it should be sufficient for my set up. Car is foot brake, no electronic class and best 1/4 mile was 112 mph so I think that should be enough brake to stop my car. Plan on using the existing spindles. Thanks
http://www.summitracing.com/parts/WIL-140-1016/
Checked Strange, SSBC, BAER, summitt packages and this seems where I will end up. Would appreciate any input from brake guys on the compatability of this wilwood set up as I am thinking it should be sufficient for my set up. Car is foot brake, no electronic class and best 1/4 mile was 112 mph so I think that should be enough brake to stop my car. Plan on using the existing spindles. Thanks