Lets see some engine pics

[PRO 48 Fleetline]

Another little mouse



175 shot
http://www.youtube.com/watch?v=AhCxTbq5dXk&feature=PlayList&p=101B70B3576B8CDC&playnext=1&index=57

Whats the specs on this motor im in loveeeeeeeee sweet ride!

 

[BryanH]

Some nice photos there, im a motor guy

Heres my home brewed horsepower, Tall Deck 482" BBC just a bitty Moonyham helix 6.71 blower on alky.. Dart block, Callies Crank, alum rod Arias piston combo, Brodix CNC heads, Littlefield Intake, Isky roller,Crower Lifters& Rockers, Smith Bros. pushrods makes good power and reliable, that powers my stock bodied 41 Willys street rod chassis, footbraked to 7.60's hope to up that ante in '09

 

[Anonymous]

Wow, Man I was starting to be proud of mine until I seen those. #-o

 

[PRO 48 Fleetline]

Bryon Love that lil purple 406 in your photo bucket it looks identical to my 406 same heads etc how do those canfileds work for you?

 

[BryanH]

Heh, thats in my girlfriends Camaro, those Canfields are a decent head, that motor runs good and hope we get to run that at a track next year also, think it should run mid low 11's, yeah she likes purple too we finished this off with billet pullies, polished alum pump and serp belt drive billet msd dist and of course purple plug wires!!

 

[alowerlevel]

In my Chevelle

 

[Phantom]

byPRO 48 Fleetline
Whats the specs on this motor im in loveeeeeeeee sweet ride!

Dart little m 4.125 bore steel caps oringed
Lunati pro series crank 3.875
Oliver rods 6.0 Billet rods
JE Pistons 115958 8cc dome
H e l l fire rings
Clevite 77 H bearings
Fluidampr
Canton pan and pump
Dart 227 100% cnc heads
Crane mechanical roller 282 290 715 688
Cloyes roller with bearing
Crane girdle comp stainless rockers
Super victor
Nos Pro race fogger
950 pro systems
th400 with a tci break coan 5500 9 inch
moser 9 inch spool 33 spline axles 433 gears

 

[PRO 48 Fleetline]

Heh, thats in my girlfriends Camaro, those Canfields are a decent head, that motor runs good and hope we get to run that at a track next year also, think it should run mid low 11's, yeah she likes purple too we finished this off with billet pullies, polished alum pump and serp belt drive billet msd dist and of course purple plug wires!!

Bryon awesome lil motor its just nice to see and ironic a motor exacatly like mine except color same intake going to run a 4 hole taper polished HVH aswell 7 quart pan and a polished huricane nice peice what size are those heads? cant wait till i get mine i just smoothed and primered my block tonight and it will go back to the machine shop to be assembeld.
Its a 10.5.1 Mahle forged flat tops scat crank and 6" rods solid roller
Lunati Voodoo 243-239 @.050
MSD and a csr elecrtic pump.

 

[BryanH]

Heh, thats in my girlfriends Camaro, those Canfields are a decent head, that motor runs good and hope we get to run that at a track next year also, think it should run mid low 11's, yeah she likes purple too we finished this off with billet pullies, polished alum pump and serp belt drive billet msd dist and of course purple plug wires!!

Bryon awesome lil motor its just nice to see and ironic a motor exacatly like mine except color same intake going to run a 4 hole taper polished HVH aswell 7 quart pan and a polished huricane nice peice what size are those heads? cant wait till i get mine i just smoothed and primered my block tonight and it will go back to the machine shop to be assembeld.
Its a 10.5.1 Mahle forged flat tops scat crank and 6" rods solid roller
Lunati Voodoo 243-239 @.050
MSD and a csr elecrtic pump.

whoa they are real similar engines!! my girls is also a 10.5 to 1 Mahle piston, 6" H-beam rod and Scat crank dealie, those are the 215cc Canfields, i left a little on the table as i put a flat tappet cam in hers and not a roller

 

[PRO 48 Fleetline]

Heres a few photos of the block i finished smoothing and primering tonight should be in paint by the weekend.